Single-slot slices may be compatible with only slot 0, or with slots 0 and 1, with the latter type being the most flexible.
A range of slice card pinouts has been investigated and they break down as follows:
| Slice | compatible | Form |
|---|---|---|
| Full Speed USB | 0 or 1 | A |
| 10/100 Ethernet | 0 or 1 | A |
| Bluetooth | 0 or 1 | A |
| Zigbee | 0 or 1 | A |
| Wifi | 0 or 1 | A |
| CANbus | 0 or 1 | A |
| Image Sensor | 1 only | B |
| Basic Audio | 0 or 1 | B |
| Transport Stream | 0 or 1 | A |
| Octo uart | 1 only | B |
| Ethercat HIF | 1 only | A |
| Flexray | 0 or 1 | B |
| Slice | Form |
|---|---|
| High Speed USB | D |
| Dual Port Ethernet | E |
| SDRAM | D |
| LCD connector | D |
| Dual Axis PMSM | E |
| App | Core Board | Slices |
|---|---|---|
| L1 AVB Audio Endpoint | L1 | Basic Audio, Ethernet |
| L1 AVB Video Endpoint | L1 | Transport Stream, Ethernet |
| L1 Automotive Ethernet Endpoint | L1 | Basic Audio, Broadreach Ethernet |
| Ethernet-Serial Bridging | L1 | OctoUart, Ethernet |
| AVB-flexray bridge | L1 | Broadreach Ethernet, Flexray |
| Dual Port AVB AV Endpoint | L2 | Dual Port Ethernet, Basic Audio, Transport Stream |
| EtherCat Motor Controller | L2 | Dual Port Ethernet, Dual Axis Motor Control |
| EtherCat Slave | L2 | Dual Port Ethernet, Ethercat Host Interface |
Refer to the detailed Slicekit Hardware Specificiation documentation for design details and full connector pinouts. Design files and information sufficient for independant development of compatible slicecards is planned for the very near future.